220V 3KW Variable Frequency Inverter Vector Control 1 Phase to 3 Phase Frequency Inverter


In stock

SKU: 1398819 Categories: , , Tags: , ,


Name:Variable Frequency Inverter
Input:1PH AC 200-240V±10% 50-60Hz
Output:3PH 0-500Hz
Control Method:voltage vector
Braking Resistor:100Ω
-Built-in PID control function, can easily constitute a simple automated control system.
-Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting and so on.
-Other functions: deceleration stop or freewheel stop, DC brake, automatic reset restart, PLC program control and so on.
-Provide a variety of fault protection: over-current, overvoltage, undervoltage, over temperature, phase loss, overload and other protection.
Safety Precaution:
– Do not arbitrarily reform the inverter.
– Do not do the voltage withstand test on the inverter.
– Do not connect the contactor with the output circuit.
– When power is on, do not change the wiring and terminal.
– Do not connect the power to the U, V, W output terminals.
– Before wring, please make sure that the input power is off.
– The grounding terminals must be connected with the ground.
– Please connect the brake resistor according to the wiring diagram.
– The wring work should be operated by the professional electrical engineer.
– Cut off the main circuit power before doing some  check  and maintain work.
– Having paused circuit wiring emergently, please  make sure that  the check is effective.
– Do not touch  the  terminals  of  inverter,  which  are  very  dangerous because there is high voltage on them.
– Confirm that the operation signal is cut off. Before reset  the  alarm device,or the inverter may start suddenly.
– Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter.
– Mare sure to install a protection cover before power-on. When removing the cover, be sure to make the power off.
– Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.
– If you want to reset the inverter with the retry function, do not get close to the mechanical equipment, because the inverter will restart  suddenly when the alarm stops.

Package Included:

1 x Variable Frequency Inverter
1 x Manual

Additional information

Weight 1.36 kg


There are no reviews yet.

Be the first to review “220V 3KW Variable Frequency Inverter Vector Control 1 Phase to 3 Phase Frequency Inverter”